Honda VT750C2 Shadow Spirit Service Manual page 292

CRANKSHAFTITRANSMISSION
Stake the bearing inner and outer race lock nuts.
INSTALLA
TION
Coat new
O~rings
with engine oil and install them
into the6rifice grooves.
Install the orifice into the crankcase.
Coat a new O-ring with engine oil and install it into
the groove in the gear case.
Install the output gear case assembly into the left
. . 0
crankcase by aligning the dowel pin with the crank-
"0.
case hole.
Apply sealant to the output gear case mounting bolt
threads.
Tighten the bolts to the specified torque.
TORQUE: 31 N·m (3.2 kgf·m, 23 Ibf·ft)
Install the stay, aligning its hole with the gear case
boss and tighten the bolt securely.
13-45