Installation - Honda VT750C2 Shadow Spirit Service Manual

CYLINDER HEAD/VALVE
If the rear cylinder
has not been
serviced, begin
here.
If both camshafts
have been serviced,
begin installation of
the front camshaft.
FRONT CYLINDER TDC SETTING
Remove the rear cylinder head cover (page 9-7) and
check the rear cylinder camshaft position as follows:
Turn the crankshaft counterclockwise and align the
"RT" mark on the flywheel with the index notch on
the left crankcase cover, then check the identifica­
tion mark "R" on the rear camshaft.
- If the "R" mark faces up, turn the crankshaft
counterclockwise 1-1n (412°) turn (align the "FT"
mark on the flywheel with the index notch) and
begin installation of the front camshaft.
- If the "R" mark faces down (cannot be seen), turn
the crankshaft counterclockwise 1n (52°) turn
(align the "FT" mark with the index notch) and
begin installation of the front camshaft.
Install the front camshaft (page 9-29).
BOTH CYLINDER TDC SETTING
Align the "FT" mark on the flywheel with the index
notch on the left crankcase cover.
Install the front camshaft (page 9-29).
Set the rear cylinder at TDC (page 9-29).
Install the rear camshaft (page 9-29).
INDEX NOTCH
"RT" MARK
"R" MARK
INDEX NOTCH
"FT" MARK
9-28