FUEL SYSTEM
Connect the throttle cables to the throttle drum and
install them onto the cable stays.
Connect the carburetor to the insulator while align
ing its lug with the insulator groove.
Tighten the insulator band screw securely.
Except california
Connect the air vent hose to the clamp.
type:
Connect the TP sensor 3P connector.
Connect the PAIR .control valve vacuum hose to the
3-way joint.
Install the following:
-
Air cleaner housing (page 6-7)
-
Fuel tank (page 3-4)
Perform thefollowing inspections and adjustments:
Engine idle speed (page 4-15)
-
Throttle operation (page 4-5)
-
Pilot screw if it was replaced (page 6-25)
6-22