Honda VT750C2 Shadow Spirit Service Manual page 133

FUELSVSTEM
Damage
to
the fuel
cut-off solenoid
valve may result
from use of a high
pressure air source.
Use a hand­
operated air pump
only.
Remove the pressure pump and connect it to the
FUEL CUT-OFF FLOAT CHAMBER PORT
EVAP CAV control valve port.
Pump air through the float chamber port.
Connect the 12 V battery to the fuel cut-off solenoid
valve 2P connector terminals.
Connect a vacuum pump to the EVAP CAV control
valve port. Apply the specified vacuum to the fuel
cut-off
~pJenoid
valve.
SPECIFIED VACUUM: 250 mm Hg
The specified vacuum should be maintained.
Replace the fuel cut-off solenoid valve if vacuum is
not maintained.
SOLENOID VALVE
~
PRESSURE PUMP
Remove the pressure pump and connect it to the
vacuum port.
Pump air through the float chamber port.
Replace the fuel cut-off solenoid valve if necessary.
Remove the pressure pump and install the fuel cut ­
off solenoid valve in the reverse order of removal
(page 6-33).
VACUUM PORT
PRESSURE PUMP
2P CONNECTOR BATTERY
~--_.~------------1
6-34