-
- - - - - - - - - - - - - - - - -
-
';-~-'--~:-~:
CYLINDER HEAD/VALVE
Lubricate the molybdenum disulfide oil to the valve
guide sliding surface of the valve stem.
Install the valve into the valve guide.
NOTE:
• Exhaust valve spring has a larger 0.0. than
intake valve spring.
• To avoid damage to the stem seal, turn the valve
slowly when installing the valve.
Install the valve spring with tightly wound coils fac
ing the combustion chamber.
Install tile spring retainer.
:--".
Grease the cotters
lns~~11 the cotters using a special tool.
SPRING COMPRESSOR
to ease
installatioh.,~~~:
,
,.,;', ' , '
V~h,e
spring
comp~or
07757-0010000
; iN
()i[E:
'"egn1'pl"essingth~v~,lve
springs more than neces
sary will cause loss
Qf
va Ive spring tension.
~upportthecylinder
head so the valve heads will
nqtcontacl.anything and possibly get damaged.
ta~'th~.~V~IY~j~l~ms
gently with two plastic ham
. ;rl1~rs~~~'se~tt~~;COtterS firmly as shown.
1~;~t~!!iitl,~s~f~~ptu-gS
(page 4-10).
9..23