Transmission - Honda VT750C2 Shadow Spirit Service Manual

CRANKSHAFT/TRANSMISSION
Press the new bearings until the metal installer
INSTALLER SET
flange fully seated.
I
BEARING
Make sure the bearing mating line aligns with the
index mark on the crankcase.
Check the oil clearance (page 13-16).
• After selecting new bearings, recheck the clear ­
ance. Incorrect clearance can cause severe
engine damage.
Install the crankshaft (page 13-13).
TRANSMISSION
REMOVAL
Separate the crankcase (page 13-9).
Remove the fork shaft from the shift forks.
Remove the shift forks and shift drum.
13-20