Transmission Assembly; Mainshaft - Honda VT750C2 Shadow Spirit Service Manual

M5 GEAR BUSHING
~
SPLlNEw~~fij
SNAPRING
M3 GEAR (23 T)
M1 GEAR (15 T)
M4GEAR (25T)
CRANKSHAFTITRANSMISSION
TRANSMISSION ASSEMBLY
Clean all parts in solvent.
Apply engine oil to the all gear teeth.
Apply molybdenum disulfide oil to the gear bushing
sliding surface and shift fork grooves to ensure ini ­
tiallubrication.
Assemble all parts into their original positions.
NOTE:
• Check the gears for freedom of movement or
rotation on the shaft.
• Install the washers and snap rings with the
chamfered edges facing the thrust load side.
• Do not reuse a worn snap ring which could easily
spin in the groove.
• Check that the snap rings are seated in the
grooves and align their end gaps with the
grooves of the spline..
• Ali9'1; the lock washer tabs with the spline washer
grooves.
• Align the oil holes in the M5 gear bushing and
m<:linshaft, and C1, C4 gear bushing and counter ­
shaft
MAINSHAFT
M2 GEAR (20T)