Cylinder Head Installation - Honda VT750C2 Shadow Spirit Service Manual

CYLINDER HEADNALVE
CYLINDER HEAD INSTALLATION
NOTE:
• The front cylinder head uses the same service
procedure as the rear cylinder head.
• Be careful not to damage the mating surfaces
when cleaning the cylinder head mating surface.
• When cleaning the cylinder head mating surface,
place the shop towel overthe cylinder opening to
prevent dust or dirt from entering the engine.
Clean the gasket mating surfaces ofthe cylinder and
cylinder head thoroughly, being careful not to dam­
age them.
Install the cam chain guide by aligning the guide
end with the groove in the crankcase and the bosses
with the groove in the cylinder.
Install the dowel pins and a new gasket.
The cylinder heads are identified by marks on their
oil pock§ts.
• "F": Front cylinder head
• "R": Rear cylinder head
9-24