LIGHTS/METERS/SWITCHES
SPEEDOMETER REMOVAL/
INSTALLATION
"----;;-.~
..
j~~"":t.:\7
Remove the bolts and speedometer assembly from
(SPEEDOMETER ASSEMBLY
the fuel tank.
Slide the dust cover and disconnect the speedome
ter 12P connector.
Remove the screws, switch cover and trip meter
reset switch.
Remove the screws, clamp, speedometer and 0
ring.
Check the O-ring is in good condition, replace it if
necessary.
Install the removed parts into the speedometer
cover in the reverse order of removal.
NOTE:
Install the reset switch with its boss facing down.
21-10