Show Commands - Fujitsu PRIMERGY BX900 User Manual

10.17.5

Show Commands

The 'show' command set is used in DiffServ to display configuration and status information for:
Classes
Policies
Services
This information can be displayed in either summary or detailed formats. The status information is only
shown when the DiffServ administrative mode is enabled; it is suppressed otherwise. There is also a
'show' command for general DiffServ information that is available at any time.
10.17.5.1 show diffserv
This command displays the DiffServ General Status Group information, which includes the current
administrative mode setting as well as the current and maximum number of rows in each of the main
DiffServ private MIB tables.
Syntax
show diffserv
Default Setting
None
Command Mode
Privileged EXEC and User EXEC
Display Message
DiffServ Admin mode: The current value of the DiffServ administrative mode.
Class Table Size Current/Max: The current or maximum number of entries (rows) in the Class Table.
Class Rule Table Size Current/Max: The current or maximum number of entries (rows) in the Class
Rule Table.
Policy Table Size Current/Max: The current or maximum number of entries (rows) in the Policy
Table.
Policy Instance Table Size Current/Max: The current or maximum number of entries (rows) in the
Policy Instance Table.
Policy Attribute Table Size Current/Max: The current or maximum number of entries (rows) in the
Policy Attribute Table.
Service Table Size Current/Max: The current or maximum number of entries (rows) in the Service
Table.
2011 Fujitsu Technology Solutions
©
763