Fujitsu PRIMERGY BX900 User Manual page 403

10.4.3.15 switchport acceptable-frame-type
This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged frames
or priority frames received on this interface are discarded. For Admit All mode, untagged frames or
priority frames received on this interface are accepted and assigned the value of the interface VLAN ID
for this port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q
VLAN Specification.
Syntax
switchport acceptable-frame-type {tagged | all}
no switchport acceptable-frame-type {tagged | all}
tagged - VLAN only mode.
all - Admit all mode.
no - This command sets the frame acceptance mode per interface to Admit All. For Admit All mode,
untagged frames or priority frames received on this interface are accepted and assigned the value of
the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Default Setting
Admit all
Command Mode
Interface Config
2011 Fujitsu Technology Solutions
©
401