Fujitsu PRIMERGY BX900 User Manual page 718

no - This command is used to remove the configured RADIUS authentication server or the RADIUS
accounting server. If the 'auth' token is used, the previously configured RADIUS authentication server
is removed from the configuration. Similarly, if the 'acct' token is used, the previously configured
RADIUS accounting server is removed from the configuration. The <ipAddr|ipv6Addr|hostname>
parameter must match the IPv4/IPv6 address or Host name of the previously configured RADIUS
authentication / accounting server.
Default Setting
None
Command Mode
Global Config
10.16.4.3 radius-sever key
This command is used to configure the shared secret between the RADIUS client and the RADIUS
accounting / authentication server. Depending on whether the 'auth' or 'acct' token is used, the shared
secret will be configured for the RADIUS authentication or RADIUS accounting server. The IP address
provided must match a previously configured server. When this command is executed, the secret will be
prompted. The secret must be an alphanumeric value not exceeding 20 characters.
Syntax
radius-server key {acct | auth} <ipAddr|ipv6Addr|hostname> <0|7> <key-value>
<ipAddr|ipv6Addr|hostname> - is a IPv4/IPv6 address or Host Name.
<0|7> - 0 specifies key in plain text and 7 specifies key in excrypted form.
<key-value> - shared secret key.
Default Setting
None
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
716