Http Commands - Fujitsu PRIMERGY BX900 User Manual

10.6.8

HTTP commands

10.6.8.1 show ip http
This command displays the http settings for the switch.
Syntax
show ip http
Default Setting
None
Command Mode
Privileged Exec
Display Message
HTTP Mode (Unsecure): This field indicates whether the HTTP mode is enabled or disabled.
HTTP Port: This field specifies the port configured for HTTP.
HTTP Mode (Secure): This field indicates whether the administrative mode of secure HTTP is
enabled or disabled.
Secure Port: This field specifies the port configured for secure HTTP.
Secure Protocol Level(s): The protocol level may have the values of SSL3, TSL1, or both SSL3
and TSL1.
10.6.8.2 ip javamode
This command specifies whether the switch should allow access to the Java applet in the header frame
of the Web interface. When access is enabled, the Java applet can be viewed from the Web interface.
When access is disabled, the user cannot view the Java applet.
Syntax
ip javamode
no ip javamode
no - This command disallows access to the Java applet in the header frame of the Web interface.
When the jave mode is disabled, the user cannot view the Java applet.
Default Setting
Enabled
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
543