Fujitsu PRIMERGY BX900 User Manual page 100

Protocol Mode - Specify the protocol of mode to download. The available options are FTP, TFTP
and HTTP.
Configurable Data
FTP/TFTP Server IPv4 Address - Enter the IPv4 address of the FTP/TFTP server. The factory
default is 0.0.0.0.
FTP/TFTP Server Host Name - Enter the Host Name of the FTP/TFTP server.
FTP/TFTP Server IPv6 Address - Enter the IPv6 address of the FTP/TFTP server.
FTP User - Enter the user name on the FTP server.
FTP Password - Enter the password of the FTP user.
FTP/TFTP File Path (Source) - Enter the path on the FTP/TFTP server where the selected file is
located. You may enter up to 96 characters (including the tailing slash). The factory default is blank.
FTP/TFTP File Name (Source) - Enter the name on the FTP/TFTP server of the file you want to
download. You may enter up to 32 characters. The factory default is blank.
FTP/TFTP File Name (Target) - Enter the name on the switch of the file you want to save. You may
enter up to 30 characters. The factory default is blank.
Select File (Source) - Using the file manager to choose the file you want to download to switch.
File Name (Target) - Enter the name on the switch of the file you want to save. You may enter up to
30 characters. The factory default is blank.
Start File Transfer - To initiate the download you need to check this box and then select the Apply
button.
Non-Configurable Data
The last row of the table is used to display information about the progress of the file transfer. The
screen will refresh automatically until the file transfer completes.
Command Buttons
Apply - Send the updated screen to the switch and perform the file download.
2011 Fujitsu Technology Solutions
©
98