Fujitsu PRIMERGY BX900 User Manual page 80

Operational MAC Address – The operational MAC address of this switch. (Only used in stackable
connection blade)
Hardware Version - The hardware version of this switch. The first byte is the major version and the
second byte represents the minor version.
Loader Version - The release version maintenance number of the loader code currently running on
the switch. For example, if the release was 1 and the version was 2, the format would be '1.2'.
Boot Rom Version - The release version maintenance number of the boot rom code currently
running on the switch. For example, if the release was 1 and the version was 2, the format would be
'1.2'.
Label Revision Number - The label revision serial number of this switch is used for manufacturing
purpose.
Runtime Version - The release version maintenance number of the code currently running on the
switch. For example, if the release was 1 and the version was 2, the format would be '1.2'.
Operating System - The operating system currently running on the switch.
Network Processing Device - Identifies the network processor hardware.
Additional Packages - A list of the optional software packages installed on the switch, if any. For
example, QoS, IPv6 or Stacking support.
Module - The SFP module name.
Type - The SFP type
Status - The SFP status.
Ethernet Compliance Codes - Transceiver's compliance codes.
Vendor Name - The SFP transceiver vendor name shall be the full name of the corporation, a
commonly accepted abbreviation of the name of the corporation, the SCSI company code for the
corporation, or the stock exchange code for the corporation.
Vendor Part Number - Part number provided by SFP transceiver vendor.
Vendor Serial Number - Serial number provided by vendor.
Vendor Revision Number - Revision level for part number provided by vendor.
Vendor Manufacturing Date - Identifies the network processor hardware.
Command Buttons
Refresh - Refresh the page with the latest data
2011 Fujitsu Technology Solutions
78
©