Udld Commands - Fujitsu PRIMERGY BX900 User Manual

10.6.16

UDLD Commands

10.6.16.1 show udld
This command uses to display the current UDLD configuration and the information of receiving neighbors
for all interfaces or a specific interface.
Syntax
show udld {slot/port}
<slot/port> - Configs a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port enable operational state: Show the Port Enable Operational State of the selected port.
Current bidirectional state: Show the Bidirectional State of the selected port.
Current operational state: Show the runtime Operational State of the selected port. This item will be
hidden if the port doesn't enable udld.
Message interval: Show the runtime Message Interval of the selected port. This section will be hidden
if the port doesn't enable udld.
Timeout interval: Show the runtime Timeout Interval of the selected port. This section will be hidden if
the port doesn't enable udld.
Remote Entry: Show all information of the remote entry if received.
Expiration time: Show the runtime Expiration Time of the remote entry.
Device Id: Show the Device Id associated with the remote entry.
Device Name: Show the Device Name associated with the remote entry.
Port Id: Show the Port Id associated with the remote entry.
Neighbor echo device : Show the Device Id included in Echo TLV associated with the remote
entry.
Neighbor echo port: Show the Port Id included in Echo TLV associated with the remote entry.
Message Interval: Show the message interval associated with the remote entry.
Timeout Interval: Show the timeout interval associated with the remote entry.
CDP Device Name: Show the CDP Device Name associated with the remote entry.
2011 Fujitsu Technology Solutions
©
574