Fujitsu PRIMERGY BX900 User Manual page 723

This command is used to configure specified connection timeout value of TACACS.
Syntax
timeout [<seconds>]
If this command without any parameter, the timeout value will be removed and use global timeout.
<seconds> - The connection timeout value of TACACS (Range: 1 – 30).
Default Setting
None
Command Mode
TACACS mode
10.16.5.2 tacacs key
This command is used to configure global authentication and encryption key of TACACS server.
Syntax
tacacs key <0/7> <key-value>
no tacacs key
Note that the length of the secret key is up to 32 characters.
<0/7> - 0 specifies key in plain text and 7 specifies key in excrypted form.
<key-value> - TACACS authentication and encrypted key.
no - This command is used to remove the TACACS server secret key.
Default Setting
None
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
721