Fujitsu PRIMERGY BX900 User Manual page 655

10.10.2.4 spanning-tree mode
This command sets the Force Protocol Version parameter to a new value. The Force Protocol Version can
be one of the following:
1. stp - ST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1d functionality supported).
2. rstp - RST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1w functionality supported).
3. mstp - MST BPDUs are transmitted (IEEE 802.1s functionality supported).
Syntax
spanning-tree mode {stp | rstp | mstp}
Default Setting
mstp
Command Mode
Global Config
10.10.2.5 spanning-tree bpdu forwarding
This command sets the BPDU forwarding function to Enabled or Disabled. The BPDU forwarding function
can be set for allowing/denying the forwarding of BPDU packets.
Syntax
spanning-tree bpdu-forwarding
no spanning-tree bpdu-forwarding
no - This command sets the BPDU forwarding mode parameter to Disabled.
Default Setting
Enabled
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
653