10.15.1.2
show sntp client
This command displays SNTP client settings.
Syntax
show sntp client
Default Setting
None
Command Mode
Privileged Exec
Display Message
Client Supported Modes: Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version: The highest SNTP version the client supports.
Port: SNTP Client Port
Client Mode: Configured SNTP Client Mode.
Unicast Poll Interval: Poll interval value for SNTP clients in seconds as a power of two.
Poll Timeout (Seconds): Poll timeout value in seconds for SNTP clients.
Poll Retry: Poll retry value for SNTP clients.
2011 Fujitsu Technology Solutions
©
689