Fujitsu PRIMERGY BX900 User Manual page 584

10.6.17.5 show lldp remote-device detail
This command uses to display detailed information about remote devices that transmit current LLDP data
to an interface on the system.
Syntax
show lldp remote-device detail <slot/port>
<slot/port> - Displays a specific interface.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Local Interface: Identifies the interface that received the LLDP frame from the remote device.
Chassis ID Subtype: Shows the type of identification used in the Chassis ID field.
Chassis ID: Identifies the chassis of the remote device.
Port ID Subtype: Identifies the type of port on the remote device.
Port ID: Shows the port number that transmitted the LLDP frame.
System Name: Shows the system name of the remote device.
System Description: Describes the remote system by identifying the system name and versions of
hardware, operating system, and networking software supported in the device.
Port Description: Describes the port in an alpha-numeric format. The port description is configurable.
System Capabilities Supported: Indicates the primary function(s) of the device.
System Capabilities Enabled: Shows which of the supported system capabilities are enabled.
Management Address: For each interface on the remote device with an LLDP agent, lists the type of
address the remote LLDP agent uses and specifies the address used to obtain information related to
the device.
Time To Live: Shows the amount of time (in seconds) the remote device's information received in the
LLDP frame should be treated as valid information.
MAC/PHY Configuration/Status
Auto-Negotiation - Specifies whether the auto-negotiation is supported and whether the
auto-negotiation is enabled.
PMD Auto-Negoration Advertised Capabilities - Specifies the auto-negotiation and speed
capabilities of the PMD.
Operational MAU Type - Specifies the current duplex and speed settings of the sending
system.
Power Via MDI
MDI Power Support - Specifies the MDI power support capabilities of the sending IEEE 802.3
LAN station.
PSE Power Pair - Specifies which pair is powered.
2011 Fujitsu Technology Solutions
©
582