Secure Http - Fujitsu PRIMERGY BX900 User Manual

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

Secure HTTP

Figure : Secure HTTP Config

Configurable Data

Admin Mode - This select field is used to Enable or Disable the Administrative Mode of Secure

HTTP. The currently configured value is shown when the web page is displayed. The default value is

TLS Version 1 - This select field is used to Enable or Disable Transport Layer Security Version 1.0.

The currently configured value is shown when the web page is displayed. The default value is

SSL Version 3 - This select field is used to Enable or Disable Secure Sockets Layer Version 3.0.

The currently configured value is shown when the web page is displayed. The default value is

HTTPS Port Number - This field is used to set the HTTPS Port Number. The value must be in the

range of 1 to 65535. Port 443 is the default value. The currently configured value is shown when the

web page is displayed.

HTTPS Session Soft Timeout - This field is used to set the inactivity timeout for HTTPS sessions.

The value must be in the range of (1 to 60) minutes. The default value is 5 minutes. The currently

configured value is shown when the web page is displayed.

HTTPS Session Hard Timeout - This field is used to set the hard timeout for HTTPS sessions. This

timeout is unaffected by the activity level of the session. The value must be in the range of (1 to 168)

hours. The default value is 24 hours. The currently configured value is shown when the web page is

Maximum Number of HTTPS Sessions - This field is used to set the maximum allowable number

of HTTPS sessions. The value must be in the range of (0 to 16). The default value is 16. The

currently configured value is shown when the web page is displayed.

Command Buttons

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400