Fujitsu PRIMERGY BX900 User Manual page 710

10.16.2.2 username defaultlogin
This command assigns the authorization login list to use for non-configured users when attempting to log
in to the system. This setting is overridden by the authorization login list assigned to a specific user if the
user is configured locally. If this value is not configured, users will be authenticated using local
authorization only.
Syntax
username defaultlogin <listname>
<listname> - an authorization login list.
Default Setting
None
Command Mode
Global Config
10.16.2.3 username login
This command assigns the specified authorization login list to the specified user for system login. The
<username> must be a configured <username> and the <listname> must be a configured login list.
If the user is assigned a login list that requires remote authorization, all access to the interface from all CLI,
web, and telnet sessions will be blocked until the authorization is complete.
Note that the login list associated with the 'admin' user cannot be changed to prevent accidental lockout
from the switch.
Syntax
username login <user> <listname>
<user> - is the login user name.
<listname> - an authorization login list.
Default Setting
None
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
708