10.4.10.9
staticcapability
This command enables the support of static port-channels (static link aggregations - LAGs). By default,
the static capability for all port-channels is disabled. The interface is a logical slot and port for a
configured port-channel.
Syntax
staticcapability
no staticcapability
no - This command disables the support of static port-channels.
Default Setting
Disabled
Command Mode
Interface Config
10.4.10.10 lacp
This command enables Link Aggregation Control Protocol (LACP) on a port.
Syntax
lacp
no lacp
no - This command disables Link Aggregation Control Protocol (LACP) on a port.
Default Setting
Enabled
Command Mode
Interface Config
2011 Fujitsu Technology Solutions
©
476