Fujitsu PRIMERGY BX900 User Manual page 167

9.2.13.2 DHCP Restart
This command issues a BOOTP or DHCP client request for any IP interface that has been set to BOOTP
or DHCP mode via the ip address command. DHCP requires the server to reassign the client's last
address if available. If the BOOTP or DHCP server has been moved to a different domain, the network
portion of the address provided to the client will be based on this new domain.
Figure : DHCP Restart
Command Buttons
Reset - Send the updated screen to the switch perform the restart DHCP client.
9.2.13.3 DHCP6 Restart
This command issues a DHCP6 client request for any IP interface that has been set to DHCP mode via
the IP address command. DHCP requires the server to reassign the client's last address if available. If
the DHCP server has been moved to a different domain, the network portion of the address provided to
the client will be based on this new domain.
Figure : DHCP6 Restart
Command Buttons
Reset - Send the updated screen to the switch perform the restart DHCP6 client.
2011 Fujitsu Technology Solutions
©
165