10.6.7
SNMP Inform Commands
10.6.7.1
show snmpinform
This command displays SNMP inform receivers. Inform messages are sent across a network to an
SNMP Network Manager. These messages alert the manager to events occurring within the switch or on
the network.
Syntax
show snmpinform
Default Setting
None
Command Mode
Privileged Exec
Display Message
SNMP Inform Flags: Admin mode of SNMP inform function.
SNMP Inform Retries: How many times to resend the inform.
SNMP Inform Timeout: How many seconds does the switch to wait for the inform ACK.
SNMP Inform Name: The community string of the SNMP inform packet. This may be up to 64
alphanumeric characters. This string is case sensitive.
IP Address: The IPv4 or IPv6 address to receive SNMP inform from this device.
SNMP Version: The inform version to be used by the receiver.
SNMP v2 - Uses SNMP v2 to send inform to the receiver
SNMP v3 - Uses SNMP v3 to send inform to the receiver
Status: A pull down menu that indicates the receiver's status (enabled or disabled) and allows the
administrator/user to perform actions on this user entry:
Enable - send inform to the receiver
Disable - do not send inform to the receiver.
2011 Fujitsu Technology Solutions
©
540