Fujitsu PRIMERGY BX900 User Manual page 276

9.4.1.3 Port Status
Figure : Port Access Control Port Status
Selection Criteria
Port - Selects the port to be displayed. When the selection is changed, a screen refresh will occur
causing all fields to be updated for the newly selected port. All physical interfaces are valid.
Non-Configurable Data
Control Mode - Displays the configured control mode for the specified port. Options are:
force unauthorized: The authenticator port access entity (PAE) unconditionally sets the
controlled port to unauthorized
force authorized: The authenticator PAE unconditionally sets the controlled port to
authorized.
auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator, and the authentication
server.
Quiet Period - This field displays the configured quiet period for the selected port. This quiet period
is the value, in seconds, of the timer used by the authenticator state machine on this port to define
periods of time in which it will not attempt to acquire a supplicant. The quiet period is the period for
which the authenticator does not attempt to acquire a supplicant after a failed authentication
exchange with the supplicant. The quiet period is a number in the range of 0 and 65535.
Transmit Period - This field displays the configured transmit period for the selected port. The
transmit period is the value, in seconds, of the timer used by the authenticator state machine on the
specified port to determine when to send an EAPOL EAP Request/Identity frame to the supplicant.
The transmit period is a number in the range of 1 and 65535.
Supplicant Timeout - This field displays the configured supplicant timeout for the selected port. The
supplicant timeout is the value, in seconds, of the timer used by the authenticator state machine on
this port to timeout the supplicant. The supplicant timeout is a value in the range of 1 and 65535.
2011 Fujitsu Technology Solutions
©
274