Fujitsu PRIMERGY BX900 User Manual page 198

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

Reset Config

Figure : VLAN Reset Config

Command Buttons

Reset - If you select this button and confirm your selection on the next screen, all VLAN

configuration parameters will be reset to their factory default values. Also, all VLANs, except for the

default VLAN, will be deleted. The factory default values are:

All ports are assigned to the default VLAN of 1.

All ports are configured with a PVID of 1.

All ports are configured to an Acceptable Frame Types value of Admit All Frames.

All ports are configured with Ingress Filtering disabled.

All ports are configured to transmit only untagged frames.

GVRP is disabled on all ports and all dynamic entries are cleared.

GVRP is disabled for the switch and all dynamic entries are cleared.

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400