Fujitsu PRIMERGY BX900 User Manual page 343

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

Figure : Class of Service Interface Config

Selection Criteria

Slot/Port - Specifies all CoS configurable interfaces. The option "Global" represents the most recent

global configuration settings. These may be overridden on a per-interface basis.

Configurable Data

Interface Shaping Rate - Specifies the maximum bandwidth allowed, typically used to shape the

outbound transmission rate. This value is controlled independently of any per-queue maximum

bandwidth configuration. It is effectively a second-level shaping mechanism. Default value is 0. Valid

Range is (0 to 100) in increments of 5 . The value 0 means maximum is unlimited.

Command Buttons

Restore Defaults - Restores default settings.

Apply - Send the updated configuration to the switch. Configuration changes take effect

immediately. These changes will not be retained across a power cycle unless a save is performed.

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400