Fujitsu PRIMERGY BX900 User Manual page 419

10.4.4.5 bridge-ext gvrp
This command enables GVRP. The default value is disabled.
Syntax
bridge-ext gvrp
no bridge-ext gvrp
no - This command disables GVRP.
GVRP can't be enabled as the VTP function is enabled.
i
Default Setting
Disabled
Command Mode
Global Config
10.4.4.6 bridge-ext gmrp
This command enables GARP Multicast Registration Protocol (GMRP) on the system. The default value
is disabled.
Syntax
bridge-ext gmrp
no bridge-ext gmrp
no - This command disables GARP Multicast Registration Protocol (GMRP) on the system.
Default Setting
Disabled
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
417