Fujitsu PRIMERGY BX900 User Manual page 440

This command enables IGMP Snooping on all interfaces. If an interface which has IGMP Snooping
enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), IGMP Snooping
functionality will be disabled on that interface. IGMP Snooping functionality will subsequently be
re-enabled if routing is disabled or port-channel (LAG) membership is removed from an interface that
has IGMP Snooping enabled.
Syntax
ip igmp snooping interfacemode all
all - All interfaces.
no - This command disables IGMP Snooping on all interfaces.
Default Setting
Disabled
Command Mode
Global Config
10.4.6.2.4 ip igmp snooping mcrtrexpiretime
This command sets the Multicast Router Present Expiration time on the system. This is the amount of
time in seconds that a switch will wait for a query to be received on an interface before the interface is
removed from the list of interfaces with multicast routers attached. The range is 0 to 3600 seconds. A
value of 0 indicates an infinite timeout, that is, no expiration.
Syntax
ip igmp snooping mcrtrexpiretime <0-3600>
no ip igmp snooping mcrtrexpiretime
<0-3600> - Expiration time (Range: 0 - 3600).
no - This command sets the Multicast Router Present Expiration time on the system to 0. A value of
0 indicates an infinite timeout, that is no expiration.
Default Setting
0
Command Mode
Global Config, Interface Config
2011 Fujitsu Technology Solutions
©
438