Values - Displays the values of the configured match criteria.
Command Buttons
Apply - Send the updated screen to the switch and cause the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
Cancel - Cancel the currently selected filter.
Delete - Delete the currently selected filter.
Rename - Allows to rename a specified class.
Add Match Criteria - Only one match criterion can be specified each time this button is invoked.
Based on the selected match criterion, an individual match criterion screen is provided to configure
its value.
Match criteria cannot be deleted from a class. The class must be deleted in order to remove
i
the match criteria.
Remove Class Reference - This button appears on the screen only if a specified class references
another class. The current class reference, of the specified class, is removed by invoking this button.
2011 Fujitsu Technology Solutions
©
327