Configuration Commands - Fujitsu PRIMERGY BX900 User Manual

10.12.2

Configuration Commands

Each command in a privilege level had to be specified with a separate privilege command. This
feature introduces a "wildcard" option that allows you to configure access to multiple commands with only
one privilege command. By using the all keyword, you can specify a privilege level for all commands which
begin with the string you enter. In other words, the all keyword allows you to grant access to all
command-line options and suboptions for a specified command.
10.12.2.1 Privilege
This command configure a new privilege level for users and associate commands with that privilege level
Syntax
privilege mode [all] {level <0-15> | reset} {[command1] [command2] [command3] [command4]
[command5]}
mode Configuration mode for the specified command.
all (Optional) Changes the privilege level for all the suboptions to the same level.
level level
Specifies the privilege level you are configuring for the specified command or
commands. The level argument must be a number from 0 to 15.
reset Resets the privilege level of the specified command or commands to the default and
removes the privilege level configuration from the running configuration file.
Command associated with the specified privilege level. If the all keyword is used,
command
specifies the command and subcommands associated with the privilege level. Note:
you can insert commands up to five words and the sum of total words length must be
less than 128 characters.
Default Setting
None
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
678