Fujitsu PRIMERGY BX900 User Manual page 745

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

match ip dscp

This command adds to the specified class definition a match condition based on the value of the IP

DiffServ Code Point (DSCP) field in a packet, which is defined as the high-order six bits of the Service

Type octet in the IP header (the low-order two bits are not checked).

match ip dscp <value>

<dscpval> value is specified as either an integer from 0 to 63, or symbolically through one of the

following keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, be, cs0, cs1,

cs2, cs3, cs4, cs5, cs6, cs7, ef.

Note: The ip dscp, ip precedence, and ip tos match conditions are alternative ways to specify a match

criterion for the same Service Type field in the IP header, but with a slightly different user notation.

Note: To specify a match on all DSCP values, use the match [not] ip tos <tosbits> <tosmask> command

with <tosbits> set to 0 and <tosmask> set to 03 (hex).

Command Mode

Class-Map Config

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400