Fujitsu PRIMERGY BX900 User Manual page 607

10.7.4.4 terminal monitor
This command enable logging for terminal session.
Syntax
terminal monitor
no terminal monitor
no - This command disables logging to the terminal session.
Default Setting
None
Command Mode
Privileged Exec
10.7.4.5 logging host
This command enables logging to a host where up to eight hosts can be configured.
Syntax
logging host <ipAddr|ipv6Addr|name> <addresstype> [<port>] [[<severitylevel> | <0-7>]]
< ipAddr|ipv6Addr|name > - IPv4/IPv6 address or Hostname of the log server.
<addresstype> - Logging Host Address Type (ipv4, ipv6, dns or dnsv6).
<port> - Port number.
[<severitylevel> | <0-7>] - The value is specified as either an integer from 0 to 7 or symbolically
through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4),
notice (5), informational (6), debug (7).
Default Setting
None
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
605