10.13.2
Configuration Commands
This command is to Enable/Disable the link state admin mode. Use 'link state' to enable the admin mode
of redundant function, and use no command to disable the function.
Syntax
link state
no link state
no - This command disables link state admin mode.
Default Setting
Disable
Command Mode
Global Config
This command is to Create/Destroy the link state group. Use 'link state group' to create a group. Use no
command to destroy the group.
Syntax
link state group
no link state group <group id>
<group id> - link state group id (Range: 1~32).
no - This command destroy link state group.
Default Setting
0
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
682