10.9.1.7
clear pass
This command resets all user passwords to the factory defaults without powering off the switch. You are
prompted to confirm that the password reset should proceed.
Syntax
clear pass
Default Setting
None
Command Mode
Privileged Exec
10.9.1.8
clear counters
This command clears the stats for a specified <slot/port> or for all the ports or for the entire switch based
upon the argument.
Syntax
clear counters [<slot/port> | all]
<slot/port> - is the desired interface number.
all - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
2011 Fujitsu Technology Solutions
©
615