Fujitsu PRIMERGY BX900 User Manual page 277

Server Timeout - This field displays the configured server timeout for the selected port. The server
timeout is the value, in seconds, of the timer used by the authenticator on this port to timeout the
authentication server. The server timeout is a value in the range of 1 and 65535.
Maximum Requests - This field displays the configured maximum requests for the selected port.
The maximum requests value is the maximum number of times the authenticator state machine on
this port will retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The
maximum requests value is in the range of 1 and 10.
Reauthentication Period - This field displays the configured reauthentication period for the selected
port. The reauthentication period is the value, in seconds, of the timer used by the authenticator state
machine on this port to determine when reauthentication of the supplicant takes place. The
reauthentication period is a value in the range of 1 and 65535.
Reauthentication Enabled - This field displays if reauthentication is enabled on the selected port.
This is a configurable field. The possible values are 'true' and 'false'. If the value is 'true'
reauthentication will occur. Otherwise, reauthentication will not be allowed.
Control Direction - This displays the control direction for the specified port. The control direction
dictates the degree to which protocol exchanges take place between Supplicant and Authenticator.
This affects whether the unauthorized controlled port exerts control over communication in both
directions (disabling both incoming and outgoing frames) or just in the incoming direction (disabling
only the reception of incoming frames). This field is not configurable on some platforms.
Protocol Version - This field displays the protocol version associated with the selected port. The
only possible value is 1, corresponding to the first version of the 802.1x specification. This field is not
configurable.
PAE Capabilities - This field displays the port access entity (PAE) functionality of the selected port.
Possible values are "Authenticator" or "Supplicant". This field is not configurable.
Authenticator PAE State - This field displays the current state of the authenticator PAE state
machine. Possible values are:
"Initialize"
"Disconnected"
"Connecting"
"Authenticating"
"Authenticated"
"Aborting"
"Held"
"ForceAuthorized"
"ForceUnauthorized".
Backend Authentication State - This field displays the current state of the backend authentication
state machine. Possible values are:
"Request"
"Response"
"Success"
"Fail"
"Timeout"
"Initialize"
"Idle"
2011 Fujitsu Technology Solutions
©
275