Fujitsu PRIMERGY BX900 User Manual page 107

9.2.5.2 Authorization List Config
You use this screen to configure login lists. A login list specifies the authorization method(s) you want
used to validate switch or port access for the users associated with the list. The pre-configured users,
admin and guest, are assigned to a pre-configured list named defaultList, which you may not delete. All
newly created users are also assigned to the defaultList until you specifically assign them to a different
list.
Figure : Authorization List Config
Selection Criteria
Authorization List - Select the authorization login list you want to configure. Select 'create' to define
a new login list. When you create a new login list, 'local' is set as the initial authorization method.
Method 1 - Use the dropdown menu to select the method that should appear first in the selected
authorization login list. If you select a method that does not time out as the first method, such as
'local' no other method will be tried, even if you have specified more than one method. Note that this
parameter will not appear when you first create a new login list. The options are:
Local - the user's locally stored ID and password will be used for authorization
Radius - the user's ID and password will be authorizated using the RADIUS server instead of
locally
TACACS+ - the user's ID and password will be authorizated using the TACACS+ server
LDAP- the user's ID and password will be authorizated using the LDAP server
Reject - the user is never authorizated
Undefined - the authorzation method is unspecified (this may not be assigned as the first
method)
Method 2 - Use the dropdown menu to select the method, if any, that should appear second in the
selected authorization login list. This is the method that will be used if the first method times out. If
you select a method that does not time out as the second method, the third method will not be tried.
Note that this parameter will not appear when you first create a new login list.
Method 3 - Use the dropdown menu to select the method, if any, that should appear third in the
selected authentication login list. Note that this parameter will not appear when you first create a new
login list.
Configurable Data
2011 Fujitsu Technology Solutions
©
105