Fujitsu PRIMERGY BX900 User Manual page 552

10.6.9.5 ip ssh timeout
This command sets the SSH connection session timeout value, in minutes. A session is active as long
as the session has been idle for the value set. A value of 0 indicates that a session remains active
indefinitely. The time is a decimal value from 0 to 160. Changing the timeout value for active sessions
does not become effective until the session is reaccessed. Any keystroke will also activate the new
timeout duration.
Syntax
ip ssh timeout <1-160>
no ip ssh timeout
<1-160> - timeout interval in seconds.
no - This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is
reaccessed. Any keystroke will also activate the new timeout duration.
Default Setting
5
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
550