Fujitsu PRIMERGY BX900 User Manual page 327

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

Figure : Differentiated Services Wizard

Selection Criteria

Traffic Type - Traffic type is used to define the DiffServ Class. Traffic type options: VOIP, HTTP,

FTP, Telnet, and Every.

Policing - Enabling policing will add policing to the DiffServ Policy and the policing rate will be

Outbound Priority - When Policing is enabled, Outbound Priority defines the type of policing

conform action where: High sets action to markdscp ef, Med sets action to markdscp af31, and Low

sets action to send. When Policing is disabled, Outbound Priority defines the policy where: High sets

policy to mark ipdscp ef, Med sets policy to mark ipdscp af31, Low set policy to mark ipdscp be.

Configurable Data

Ports to Include in Config - List the ports which can be configured to support a DiffServ policy. The

DiffServ policy will be added to selected ports.

Committed Rate - When Policing is enabled, the committed rate will be applied to the policy and the

policing action is set to conform. When Policing is disabled, the committed rate is not applied and the

policy is set to markdscp.

Command Buttons

Apply - Send the updated screen to the switch and cause the changes to take effect on the switch,

but these changes will not be retained across a power cycle unless a save operation is performed.

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400