Fujitsu PRIMERGY BX900 User Manual page 768

10.17.5.4 show class-map
This command displays all configuration information for the specified class.
Syntax
show class-map [<classname>]
<classname> is the name of an existing DiffServ class.
Default Setting
None
Command Mode
Privileged EXEC and User EXEC
Display Message
Class Name: The name of this class.
Class Type: The class type (all, any, or acl) indicating how the match criteria are evaluated for this
class. A class type of all means every match criterion defined for the class is evaluated simultaneously
they must all be true to indicate a class match. For a type of any each match criterion is evaluated
sequentially and only one need be true to indicate a class match. Class type acl rules are evaluated in
a hybrid manner, with those derived from each ACL Rule grouped and evaluated simultaneously, while
each such grouping is evaluated sequentially.
Match Criteria: The Match Criteria fields will only be displayed if they have been configured. They will
be displayed in the order entered by the user. These are evaluated in accordance with the class type.
The possible Match Criteria fields are: Class of Service, Destination IP Address, Destination Layer 4
Port, Destination MAC Address, Every, IP DSCP, IP Precedence, IP TOS, Protocol Keyword,
Reference Class, Source IP Address, Source Layer 4 Port, Source MAC Address, and VLAN.
Values: This field displays the values of the Match Criteria.
Excluded: This field indicates whether this Match Criteria is excluded. If the Class Name is not
specified, this command displays a list of all defined DiffServ classes. The following fields are
displayed:
Class Name: The name of this class. (Note that the order in which classes are displayed is not
necessarily the same order in which they were created.)
Class Type: The class type (all, any, or acl) indicating how the match criteria are evaluated for this
class. A class type of all means every match criterion defined for the class is evaluated simultaneously
they must all be true to indicate a class match. For a type of any each match criterion is evaluated
sequentially and only one need be true to indicate a class match. Class type acl rules are evaluated in
a hybrid manner, with those derived from each ACL Rule grouped and evaluated simultaneously, while
each such grouping is evaluated sequentially.
ACL Number: The ACL number used to define the class match conditions at the time the class was
created. This field is only meaningful if the class type is acl. (Note that the contents of the ACL may
have changed since this class was created.)
Ref Class Name: The name of an existing DiffServ class whose match conditions are being
referenced by the specified class definition.
2011 Fujitsu Technology Solutions
©
766