9.2.11 Udld - Fujitsu PRIMERGY BX900 User Manual

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

9.2.11 UDLD

9.2.11.1 UDLD Config

Figure : UDLD Config

Selection Criteria

Global Port Mode - Specifies the UDLD Global Port mode. It has three options : Disable, Normal

and Aggressive.

Interface - Specifies the list of all the physical ports on which UDLD can be configured.

Port Mode - Specifies the UDLD Port mode for the selected interface. It has three options : Disable,

Normal and Aggressive.

Configurable Data

Message - Specifies the Message Interval in seconds to send of messages in steday state. The

range is from (7 to 90). Default value is 15 seconds.

Command Buttons

Apply - Send the updated screen to the switch and cause the changes to take effect on the switch

but these changes will not be retained across a power cycle unless a save is performed.

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400