10.4.3.20
switchport priority
This command configures the default 802.1p port priority assigned for untagged packets for a specific
interface.
Syntax
switchport priority <0-7>
<0-7> - The range for the priority is 0 - 7.
Default Setting
0
Command Mode
Interface Config
This command configures the port priority assigned for untagged packets for all ports presently plugged
into the device. Any subsequent per port configuration will override this configuration setting.
Syntax
switchport priority all <0-7>
<0-7> - The range for the priority is 0-7.
all - All interfaces
Default Setting
0
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
409