9.2.6.5
Configuring Syslog
To enable the syslog system on the system, the logged messages will be sent to the host specified on
the "Hosts" page.
Figure : Syslog Config
Selection Criteria
Admin Status - For Enabling and Disabling logging to configured syslog hosts. Setting this to
disable stops logging to all syslog hosts. Disable means no messages will be sent to any
collector/relay. Enable means messages will be sent to configured collector/relays using the values
configured for each collector/relay. Enable/Disable the operation of the syslog function by selecting
the corresponding line on the pull down entry field.
Configurable Data
Local UDP Port This is the port on the local host from which syslog messages are sent. The default
port is 514. Specify the local port in the text field.
Non-Configurable Data
Messages Received - The number of messages received by the log process. This includes
messages that are dropped or ignored.
Messages Dropped - The number of messages that could not be processed due to error or lack of
resources.
Messages Relayed - The number of messages forwarded by the syslog function to a syslog host.
Messages forwarded to multiple hosts are counted once for each host.
Command Buttons
Apply - Update the switch with the values you entered.
Refresh - Refetch the database and display it again starting with the first entry in the table.
2011 Fujitsu Technology Solutions
©
115