Fujitsu PRIMERGY BX900 User Manual page 797

10.20.2.3 Moving management control from one switch to another
This command is used to move the management switch from one to another.
Syntax
switch movemanagement <fromunit> <tounit>
<fromunit> - unit number of a switch which is range from 1 to 8.
<tounit> - unit number of a switch which is range from 1 to 8.
Default Setting
None
Command Mode
Global Config
10.20.2.4 Configuring a standby switch
This command is used to configure a standby switch for a stack.
Syntax
switch standby <unit>
<unit> - unit number of a switch which is range from 1 to 8.
Default Setting
None
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
795