Fujitsu PRIMERGY BX900 User Manual page 654

10.10.2.3 spanning-tree configuration
This command sets the Configuration Identifier Name for use in identifying the configuration that this
switch is currently using. The <name> is a string of at most 32 alphanumeric characters.
Syntax
spanning-tree configuration name <name>
no spanning-tree configuration name
<name> - is a string of at most 32 alphanumeric characters.
no - This command resets the Configuration Identifier Name to its default.
Default Setting
The base MAC address displayed using hexadecimal notation as specified in IEEE 802 standard.
Command Mode
Global Config
This command sets the Configuration Identifier Revision Level for use in identifying the configuration that
this switch is currently using. The Configuration Identifier Revision Level is a number in the range of 0 to
65535.
Syntax
spanning-tree configuration revision <0-65535>
no spanning-tree configuration revision
<value> - Revision Level is a number in the range of 0 to 65535.
no - This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using to the default value, that is, 0.
Default Setting
0
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
652