Fujitsu PRIMERGY BX900 User Manual page 58

Blade server systems ethernet connection blade module sb6 / sb11a / sb11 switch version

Hide thumbs Also See for PRIMERGY BX900:

Table of Contents

sb11a-sw-r-0.40.0227.biz Operation Code

5. Enter (CB)#copy tftp://{tftp address}/{file name} image {file name} or copy ftp://{ftp

address}/{file name} image {file name} command to copy a new system image to the device. The

following message is displayed:

(CB) #copy tftp://192.168.2.1/sb11a-sw-r-0.40.0227.img image sb11a-sw-r-0.04.0227.biz

Mode........................................... TFTP

Set TFTP Server IP............................. 192.168.2.1

TFTP Path...................................... ./

TFTP Filename.................................. sb11a-sw-r-0.40.0227.img

Data Type...................................... Code

Destination Filename........................... sb11a-sw-r-0.04.0227.biz

Management access will be blocked for the duration of the transfer

Are you sure you want to start? (y/n)

6. Press Y. When the new image is downloaded, it is saved in the area allocated for the other copy of

system image.

7. Select the image for the next boot by entering the boot-system command. After this command,

enter (CB)#whichboot command to verify that the copy indicated as a parameter in the boot-system

command is selected for the next boot.

8. Enter the reload command. The following message is displayed:

(CB)# reload

Are you sure you would like to reset the system? (y/n) y

9. Enter y, the device reboots.

1. Only 2 runtime images can be stored in a system.

2. Up to 10 configuration files including factory_default can be stored in a system.

2011 Fujitsu Technology Solutions

Show Quick Links

Table of Contents

Primergy bx400