Fujitsu PRIMERGY BX900 User Manual page 262

9.3.20.5 MST Port
Figure : Spanning Tree MST Port Config
Selection Criteria
MST ID - Selects one MST instance from existing MST instances.
Unit/Slot/Port - Selects one of the physical or port channel interfaces associated with VLANs
associated with the selected MST instance.
Configurable Data
Port Priority - The priority for a particular port within the selected MST instance. The port priority is
set in multiples of 16. For example if the priority is attempted to be set to any value between 0 and
15, it will be set to 0. If it is tried to be set to any value between 16 and (2*16-1) it will be set to 16 and
so on.
Port Path Cost - Set the Path Cost to a new value for the specified port in the selected MST
instance. It takes a value in the range of 1 to 200000000.
Non-Configurable Data
Auto-calculate Port Path Cost - Displays whether the path cost is automatically calculated
(Enabled) or not (Disabled). Path cost will be calculated based on the link speed of the port if the
configured value for Port Path Cost is zero.
Port ID - The port identifier for the specified port within the selected MST instance. It is made up
from the port priority and the interface number of the port.
Port Up Time Since Counters Last Cleared - Time since the counters were last cleared, displayed
in Days, Hours, Minutes, and Seconds.
2011 Fujitsu Technology Solutions
©
260