Fujitsu PRIMERGY BX900 User Manual page 696

10.15.2.7 sntp server
This command configures an SNTP server (with a maximum of three) where the server address can be an
ip address or a domain name and the address type either IPv4, IPv6 or DNS. The optional priority can be a
value of 1-3, the version is a value of 1-4, and the port id is a value of 1-65535.
Syntax
sntp server <ipaddress/ipv6address/domain-name> <addresstype> [<1-3> [<version> [<portid>]]]
no sntp server remove <ipaddress/ipv6address/domain-name>
<ipaddress/ipv6address/domain-name> - IP address of the SNTP server.
<addresstype> - The address type is ipv4, ipv6 or dns.
<1-3> - The range is 1 to 3.
<version> - The range is 1 to 4.
<portid> - The range is 1 to 65535.
no - This command deletes an server from the configured SNTP servers.
Default Setting
None.
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
694