Fujitsu PRIMERGY BX900 User Manual page 548

10.6.8.7 ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or
to both TLS1 and SSL3.
Syntax
ip http secure-protocol <protocollevel1> [protocollevel2]
no ip http secure-protocol <protocollevel1> [protocollevel2]
<protocollevel1 - 2> - The protocol level can be set to TLS1, SSL3 or to both TLS1 and SSL3.
no - This command is used to remove protocol levels (versions) for secure HTTP.
Default Setting
SSL3 and TLS1
Command Mode
Global Config
10.6.8.8 ip http session
This command is used to set http hard-timeout, maxsessions and soft-timeout parameters.
Syntax
ip http session { hard-timeout <0-168> | maxsessions <0-16> | soft-timeout <0-60> }
no ip http session { hard-timeout | maxsessions | soft-timeout }
hard-timeout <0-168>: Configure the hard timeout (in hours) for HTTP sessions.
maxsessions <0-16>: Configure Maximum allowable number of HTTP sessions.
soft-timeout <0-60>: Configure the soft timeout (in minutes) for HTTP sessions.
no - This command sets the session parameters to default for HTTP.
Default Setting
maxsessions: 16
hard-timeout: 24
soft-timeout: 15
Command Mode
Global Config
2011 Fujitsu Technology Solutions
©
546